Select Stangs

Marcelo's 91 5.0
Miami, FL

- 306, stock crank/rods with Speed-Pro pistons, clevite rings and bearings

-Wolverine 1087 cam 289/299 dur. 510/534 lift ( 548/574 w/1.72 RR )

-Dart Jr. aluminum heads, 2.00/1.60 valves

Stage 3 ported intake and exhaust ports, blended and polished bowls all by Coat Performance, 5 angle valve job, Crane 560 lift springs and freshened by H.B.R , flow 255cfm at .500 lift ( intake )
-Scorpion 1.72 ratio 7/16 stud mount adj. rockers.
-CHM hardened one piece chromoly push rods
-Crane guide plates
-ARP 7/16 rocker studs.
-Cloyes hardened timing chain.
-FMS hardened oil pump shaft
-FMS roller lifters.
-FMS underdrive pulleys
-ARP head bolts, lower intake bolts, valve cover studs.
-FMS graphite head gaskets, FEL-PRO 1262 intake gaskets
-FMS polished tall valve covers.
-K&N valve cover breathers
-Urethane motor mounts
-FMS A/C delete

-Edelbrock RPM air gap, drilled for direct port nitrous injection
-K&N 14” air cleaner
-Mac 1-5/8” longtubes
-Mac 2.5” offroad shorty h-pipe
-Dynomax 2.5” mandrel bent tail pipes
-Flow-Master 2.5” 2 chamber mufflers
-SCE copper header gaskets

-Steeda triax shifter
-Steeda adjustable clutch cable
-Steeda double hook aluminum clutch quadrant
-Steeda firewall adjuster
-FMS aluminum drive shaft
-Hayes stage 2 clutch
-Prothane urethane transmission cross-member bushing kit.
-Prothane urethane strut, sway bar bushings.
-Prothane heavy duty urethane endlink kit
-Toxico sport XP struts and shocks
-Jamex 2 “ progressive rate lowering springs.
-Energy suspention urethane front isolators (uppers only)
-Prothane urethane rear isolators

-Custom tubular steel sub-frame connectors ( welded on )
-Steeda aluminum lower control arms
-Steeda adjustable upper control arms
-FMS new posi
-FMS 3.73 gears
-Prothane 8.8 rear bushings
-Lincoln Mark VII 73mm stainless steel piston calipers.
-EBC green stuff brake pads
-Russel Stainless caliper sleeves
-FMS 95 cobra master cylinder
-FMS 17x9 cobra R silver wheels, 235x45x17 front 245x45x17 rear tires

-FMS 9mm wires
-MSD blaster 3 coil
-MSD billet distributor w/ steel gear
-Force RL2/ MSD 6AL ignition box
-Optima red top battery
-130 amp 3G altenator.
-Holley 650 double pumper
-CSI carburetor throttle bracket
-Mallory 3 port adj. Regulator w/ autometer psi gauge
-Russel fittings, 8-, 6- stainless lines
-Holley Blue pump
-Earl’s 8- inline filter

-FMS 3 core aluminum radiator.
-Steeda radiator bracket.
-Lincoln Mark VIII electric fan.
-Mr. gasket 180 degree stat
-Murray’s black poly radiator overflow catch can.




Mustangworld Shop

Copyright © 1986 - 2000 Some web elements on this site are copyrighted and are being used with permission from their respective owners.